Latest

KX15DT Pyronix Grade 2 Digital Combined PIR and Microwave Detector

KX15DT Pyronix Grade 2 Digital Combined PIR and Microwave Detector
Product Code: KX15DT
Availability: Out Of Stock
Price:£23.00

Qty:  
   - OR -   

KX15DT Pyronix Grade 2 Digital Combined PIR and Microwave Detector

 

KX15DT Pyronix Grade 2 Digital Combined PIR and Microwave Detector

  • Dual element pyro-electric sensor
  • X-band DRO based microwave
  • 15m detection range
  • Selectable EOL (End of Line) resistors
  • AND/OR technology
  • Patented Independent Floating Thresholds (IFT)
  • Blue wave technology
  • Auto sensitivity feature
  • Digital temperature compensation
  • Triple LED indication
  • Frequency options
  • Sealed optics
  • Tamper proof brackets included
  • ABS plastics

Tested and Certified to EN 50131-2-4

COMMERCIAL / RESIDENTIAL

Features

Description

15m Volumetric detector

15m Volumetric detection coverage. Ideal for protection of rooms, offices etc.

Selectable EOL resistors

The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

AND/OR technology

AND’ mode operates as a standard dual technology detector. ‘OR’ mode will switch to microwave detection in environments where there is a risk of PIR detection being blocked,

Blue wave technology

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of 2 key components: 1). The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. 2). Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto sensitivity feature

Depending on the environment condition, the detector will automatically adjust the sensitivity

Digital Temperature Compensation

When the product is used in a hot environment this technology digitally adjusts the detector’s sensitivity allowing it to maintain its range even when the background room temperature is almost equal to the external body temperature of 32ºC (internal body temperature = 37ºC)

Active self test

If there is no activation after a 5 hour period it will actually self test both the PIR and microwave

Triple LED indication

Microwave - orange, PIR - green, alarm - blue. (KX15DTAM - Blue flashing = mask)

Microwave Frequencies Bands

3 different frequency bands to avoid interference between detectors are installed in the same room

 

ELECTRICAL

Operating voltage

9-16VDC (12V nominal)

Current consumption - no alarm

23mA

Current consumption - alarm

30mA

Relay

Solid state

Relay output

60VDC, 50mA Protected

Tamper switch

12V max, 50mA max

RFI immunity to continuous wave (CW) 80-2700MHz

10 V/m

RFI immunity to amplitude modulation (AM) 80-2700MHz

10 V/m

RFI immunity to pulse modulation (PM) 80-2700MHz

10 V/m

DTI approved frequenices

10.680, 10.587, 10.695GHz

FCC approved frequencies

10.515, 10.525, 10.535GHz

PIT approved frequencies

9.87, 9.90, 9.91GHz

PHYSICAL

Dimensions

117x69x50mm

Weight

105g

OPERATING FEATURES

Alarm period of

2.5 seconds

Detection speed

0.3 - 3m/s

Operating temperature

-30

Storage temperature

-40

OPTICAL

White light filter

6500 Lux

Optics

Sealed

Lens

3 Dimensional

Protection

Ultraviolet Light Filter

MOUNTING

Optimum coverage height (dual Tech)

1.8-2.4m

Optimum coverage height (vertical curtain)

1.8-4.0m

Optimum coverage height (long range)

1.8-2.4m

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By cctv-1
SEIL UK LTD © 2017